Patented TechnologyPatented by Heavy Water Board, Department of Atomic Energy.
Licensed PartnerUnicon is licensed partner of HWB for manufacturing, supply and installation of AFGC Systems.
MOU with HWBUnicon signed a MoU (Memorandum of Understanding) with HWB.
Results of Technology Demonstration
|Parameter||Flue Gas before NH3 injection||Flue Gas after NH3 injection|
|Flue Gas Temperature||155||145|
|Flue Gas Flow, m3/s||48.61||48.61|
|Plant Load, MW||45||45|
|Moisture content of Coal, % RC||4||4|
|Ash Content of Coal, %||15||15|
|SPM in the flue gas mg/Nm3||720||70|
Installing AFGC Systems for your factory, industry or plant? Our installation solutions extends around the world
Other Special features of our AFGC
This technology results in reduction of SPM emission drastically from a level of 600-700 mg/Nm3 to 20-70 mg/Nm3. The quality of coal, increased ash content, ash resistivity and many other factors result in the lower performance of ESP and consequent increase in SPM. Many technologies have been tried out for improving the performance of ESP but limited success. With Environmental Standards being continuously upgraded for cleaned air quality, time has come for upgrading and developing new technology for overcoming the above problem. The technology developed for flue gas conditioning to reduce the SPM emission level is extremely safe and the performance of the system is truly rewarding. The simplicity is that it can be integrated in the existing plants for reduction of SPM with minimum modifications and without shutdown time at low cost. This new technology is a boom to the existing equipments which were installed way back.
Chinnavedampatty (PO), Coimbatore - 641 049,
Tamil Nadu, India.