UNICON supplying a wide range of agitators for paints, resins, chemicals and other fluids, Speed of UNICON Agitators can be adjusted in a range of 500-6,000 RPM for the smaller agitators and 300-3,000 RPM for the larger ones. The low speed reduces material degradation to a minimum and improves quality of the stirred material. Different agitator designs are available like manual type (colloquially also called quick mixer), pale mounted, bung, C-clamp for rim mounting or in connection with a pressure tank/pressure pot. Wide, full-width impellers (blades/propellers) in different designs provide thoroughly mixing of the material, minimizing leftover sediment at the bottom of the pressure tank or drum. Air motors from 0.25 kW to 3 kW are employed, which are also available separately.






Heat Exchangers

A heat exchanger is a device built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, and natural gas processing. One common example of a heat exchanger is the radiator in a car, in which the heat source, being a hot engine-cooling fluid, water, transfers heat to air flowing through the radiator (i.e. the heat transfer medium).

UNICON Supplies different verities of Heat Exchangers according to the needs of the customer and applications. Some examples are as follows.

Shell and tube heat exchanger

Plate heat exchanger

Regenerative heat exchanger

Adiabatic wheel heat exchanger

Plate fin heat exchanger

Fluid heat exchangers

Waste heat recovery units

Dynamic scraped surface heat exchanger

Phase-change heat exchangers

Direct contact heat exchangers

Plate heat exchanger.

Advantages of UNICON Heat Exchangers

- Reduce heat/energy loss

- Lower surface temperature

- Clear coating allows visual surface inspection

- Eliminate Corrosion Under Insulation (CUI)

- Can be applied through mist method to running equipment - no downtime

- Mold and moisture resistant - improved air quality

- Low labor and equipment cost to install

Heavy Steel Fabrication

We can fabricate steel as per party requirement as required. Steel fabrication could be of M.S. or S.S. like Ducting, Fabricated pipe or structural fabrication. All the specifications and requirements of the clients are taken into consideration and well implemented. Various parameters like size, design and other aspects are taken into account during the fabrication. Proper timeliness is maintained in order to meet with all the demands of the clients.









Jacketed Vessels

In chemical engineering, a jacketed vessel is a container that designed for controlling the temperature of its contents, by using cooling or heating "jacket" around the vessel through which a cooling or heating fluid is circulated.

A jacket is an cavity external to the vessel, that permits the uniform exchange of heat between the fluid circulating in it and the walls of the vessel. There are several types of jackets, depending on the design.

  • conventional jackets

  • half-pipe coil jackets

  • dimple jackets (or plate coils)

Jacketed vessels can be employed as chemical reactors (to remove the elevated heat of reaction) or to reduce the viscosity of high viscous fluids (such as tar).

Agitation can be also used in jacketed vessels to improve the homogeneity of the fluid properties (such as temperature or concentration).

UNICON is your single source for jacketed vessels. Whether you need a half-pipe, dimple, or conventional jacket, our experts will help you. We can provide any combination of vessel and jacket materials. Our shop rolls shells and half-pipe coils to alleviate any delays in the fabrication of your vessel. We can also install baffles and agitators for mixing applications.

Pressure vessels

A pressure vessel is a closed container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.

The pressure differential is potentially dangerous and many fatal accidents have occurred in the history of development and operation of Pressure Vesssels. The design, engineering and manufacture of UNICON pressure vessels are regulated by engineering authorities backed up by laws. Due to these reasons, the standards of a pressure vessel varies from country to country, but involves parameters such as maximum safe operating pressure and temperature.

Pressure vessels are used in a variety of applications in both industry and the private sector. They appear in these sectors as industrial compressed air receivers and domestic hot water storage tanks. Other examples of pressure vessels are: diving cylinder, recompression chamber, distillation towers, autoclaves and many other vessels in mining or oil refineries and petrochemical plants, nuclear reactor vessel, habitat of a space ship, habitat of a submarine, pneumatic reservoir, hydraulic reservoir under pressure, rail vehicle airbrake reservoir, road vehicle airbrake reservoir and storage vessels for liquified gases such as ammonia, chlorine, propane, butane and LPG.

UNICON Design and Manufacture Pressure Vessels in all shapes according to the application and Space availability for installation.

Generally, almost any material with good tensile properties that is chemically stable in the chosen application can be employed. UNICON pressure vessels are made of Carbon steel, Mild Steel or Stainless Steel according to the application and pressure ranges.

These specialized vessels, generally have an in-built temperature control system and this can help to keep volatile chemicals in inert states; it can also be used to change the state of the material in order to use it for transportation. Gauges are provided with this equipment to read internal pressures and temperature.

Application of UNICON Pressure Vessel

  • Pharmaceuticals

  • Cosmetics

  • Food and Beverage

  • Plastic Processing

  • Power Generation

  • Chemicals

  • Paper and Pulp

Storage tanks

Storage Tanks are widely used in different industries for storing primary or end products . These tanks can be fabricated from stainless steel, mild steel, alluminium based on the application of the tank. Our Storage Tanks are specially designed to ensure hygiene of products by maintaining sterile environment. The stored product in the tank remains free from the contamination. These machines have an excellent finish and are easy to clean.

Our range of Storage Tanks can be supplied in different shapes and sizes as per the requirement of the customers. We offer industrial storage tank, which are designed for safety under wind and seismic conditions and optimized for rugged construction as these tanks minimize evaporation loss. Our range of storage tank are designed to various international standards.

Available in various specification & according to customers' requirements, we offer storage tanks, fluid storage tanks, stainless steel storage tanks, steel fluid storage tanks and steel storage tanks which are used for any kind of fluid. Fabricated upto 100 KL, our storage tanks, stainless steel fluid storage tanks are also featured with long lasting durability and also requires less maintenance. Storage tanks are also non-corrosive, light weight, long lasting and leak proof.

We fabricate and install highest quality storage tanks and proactive services as per the specifications of our clients. We have got the complete manufacturing facilities for all type of stainless steel fabrication of the highest quality to meet any requirement of any plant or project as per drawing and design.

S.S. Storage Tank

Stainless steel storage tank are used in many configurations which depend upon functional requirement. These functional requirements includes operating temperature, storage median etc. Stainless steel storage tank is required in applications where the storage medium or environment is caustic or minimal contamination is required. These S.S. tanks could be in various shapes like:

  • Horizontal Storage Tanks

  • Vertical Storage Tanks

  • Elliptical Shaped Storage Tanks

  • Dished Shaped Storage Tanks

  • Flat Storage Tanks

  • Conical Head Storage Tanks

MS Storage tanks

Mild steel storage tank are used in many applications in industry like HSD, Furnace Oil, LDO, Petrol etc. Our range of tanks are designed and constructed in accordance with all major codes and standards. We supply a full range mild steel staorage tanks like:

  • Horizontal M.S storage tanks

  • Vertical M.S storage tanks

  • Cylindrical M.S storage tanks

  • Flat M.S storage tanks

  • Dished M.S storage tanks

  • Conical base M.S storage tanks